skip to Main Content

IAG Stage 2 FA20 Subaru Short Block for 2013-18 BRZ / FR-S (10.0:1 Compression Ratio)

$3,699.99

IAG Stage 2 FA20 Subaru Short Block for 2013-18 BRZ / FR-S (10.0:1 Compression Ratio)

  • Weight: 0 lb
  • Dimensions: N/A
  • Installation Difficulty:
SKU: IAG-ENG-1209 Categories: , ,

Description

IAG Stage 2 FA20 Short Block The IAG Stage 2 short block starts with new Subaru FA 2.0L BRZ engine case halves that are machined for improved oiling. Then the case is bored and honed to 86.1mm on our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG?s in-house honing process is able to set piston to wall clearances tighter for a quieter running engine. The short block is measured and assembled using a new FA20 WRX / BRZ Subaru crankshaft that is matched to King main bearings. Brian Crower H-Beam rods with ARP2000 rod bolts are utilized along with King or ACL rod bearings. The case halves are sealed with new OEM case bolts and sealant. Finally lower compression IAG-Spec 86.1mm 10.0:1 compression ratio forged pistons are spec’d and installed along with an OEM oil plug finishing off the short block. The lower compression ratio is good for BRZ / FR-S forced induction conversion applications. Stage 2 FA20 Includes: Case Halves – Brand new OEM Subaru BRZ FA20 case halves bored and honed to 86.1mm Case Machining – Modified for improved oiling Case Machining – Bored and honed to 86.1mm Pistons – IAG-Spec 86.1mm 10.0:1 Forged Pistons Ring Set and 1.50″ x 2.250″ Chromoly Wrist Pins Connecting Rods – Brian Crower H-Beam / ARP2000 Rod Bolts Rod Bearings – ACL or KING XPG Main Bearings – King XPG Crankshaft – New Subaru FA20 WRX / BRZ crankshaft Case / Main Bolts – Standard Subaru case bolts Hardware – OEM Oil Plug – preinstalled at the oil pan location. Additional Options Available: Oil Plugs & Rear Main Seal – (x2) 11024AA141 Plug (x1) 806792010 Rear Main Seal (PN# IAG-ENG-1722) Compression Ratio: 10.0:1 (2.5 lower than stock compression) on standard gasket thickness. Power: The Stage 2 Short Block has a power output rating of 600BHP *All IAG Short Blocks are balanced and blueprinted. This short block features a lower compression and is intended for forced induction applications. Please review the PDF document below regarding installation break-in procedures and warranty information.

Make Model Submodel Year
Subaru BRZ/FR-S 2013 - 2018
Close search